Impact of veneer peeling machine component wear
02 Dec 2018 05:39
Tags
.
Veneer peeling machine working principle is that the wood section is driven by the card shaft rotation, the knife bed relative rotation of the wood section to do into the movement, spin out a continuous single strip, for rotary cutting. Veneer peeling machine is used to process a certain length and diameter of wood segments into a continuous single strip for the production of plywood, for the production of plywood, joinery boards and other wood-based panels using veneer peeling machine The main technical parameters have the maximum length of the machined wood segment, Diameter type.According to the maximum length and diameter of the machined wood segment: Heavy, medium, small.According to the clamping and driving mode of the rotary cut wood section: Mechanical clamping card shaft, hydraulic clamping card shaft (double axis, single axis) hydraulic clamping card shaft (double axis, single axis), shaft.With the development of society, now the network has begun to globalize, and now with the development of e-commerce, now the network application is also beginning to continue to grow.Because of its characteristics of modern marketing market, network Marketing has begun to become a new marketing route for some small and medium-sized enterprises.Veneer peeling machine is now in the network marketing is still relatively small, because the machinery is relatively important, and the network sales of products, can only be carried out by watching, can not try, touch the product.Therefore, there are many enterprises think that network marketing in veneer peeling machine machinery industry is difficult to develop.In fact, veneer peeling machine implementation of network marketing This also belongs to a new marketing road.. Veneer peeling machine is one of the equipment for the production of plywood, it belongs to the shaft mechanical transmission veneer peeling machine, suitable for the card shaft veneer peeling machine rotary cutting remaining wood core continue to spin into a single board, It can also be used to spin the trail material (300mm in diameter) into a single board.Veneer peeling machine is mainly composed of rack, double roller system, single roller system, tool holder, transmission system, electrical system and so on..In addition to checking the veneer peeling machine knife, but also pay attention to the temperature of each bearing, transmission sound, machine stability, the handle and button and limit switch effective sensitivity, especially the limit switch placement must be correct, as well as the combination of the various components, etc., should be systematically checked and adjusted , and the gearbox bearings and sliding surfaces are injected with enough lubricating oil, all reach normal, before the cutting test and use can be carried out..4. The height of the blade mouth is 0-1 mm higher than the center of the wood.If the vibration occurs during the rotary cut, it is due to the low installation of the knife, adjust the blade until the knife is not shaken.If the resistance of the rotary cut is too large or the case of broken skin, is due to the blade installation is too high, properly reduced to the appropriate can be..Preferred, veneer peeling machine industry users can use the network to promote the visibility of the product, then it is necessary to create a good website, their products to be placed on top, so that it can be more convenient, fast, reduce costs.The second is the product marketing strategy, because the current internet has a very good interactivity and guidance.Therefore, enterprises can according to the needs of users dynamic production and sales, at the same time can promote products to shape the brand of enterprises, the establishment of a good service framework.The price of the final product, the enterprise can be based on the product to establish their own pricing objectives, and finally according to the changing cost of the market supply and demand situation and the price of competitors to adjust in due course.In a card veneer peeling machine, the knife position is an important part of veneer peeling machine, and the knife position is also a part that needs to be noted when using veneer peeling machine, In our use of the time to check it regularly, the knife position is the key to veneer peeling machine, the knife bit high appearance of wood thin uneven, knife position low appearance flutter knife, must be carefully adjusted, not sloppy.The specific adjustment measures are as follows:.In the same way to measure the two ends and the middle of the knife, so that the knife and roll to maintain the level, about the card veneer peeling machine knife position measurement mainly pay attention to the above aspects of the attention, I hope the above information can be helpful to the vast number of users.:Use the triangle ruler (500x250 mm) to live on the upper and inner parts of the double flower roll, then use the ruler (150) to resist the blade upward measurement, read the triangle ruler below the intersection of the ruler scale value, rotary wood skin thickness between 1.2-1.9 when the reading is 102mm; thickness between 0.6 mm1.2 mm, Knife height in 101-102 mm; thickness between 1.9 mm2.6 mm, the knife is high in 102-102.5 mm.Thickness is larger than 2.6mm when the knife is high in 102.5-103mm.
Veneer peeling machine working principle is that the wood section is driven by the card shaft rotation, the knife bed relative rotation of the wood section to do into the movement, spin out a continuous single strip, for rotary cutting. Veneer peeling machine is used to process a certain length and diameter of wood segments into a continuous single strip for the production of plywood, for the production of plywood, joinery boards and other wood-based panels using veneer peeling machine The main technical parameters have the maximum length of the machined wood segment, Diameter type.According to the maximum length and diameter of the machined wood segment: Heavy, medium, small.According to the clamping and driving mode of the rotary cut wood section: Mechanical clamping card shaft, hydraulic clamping card shaft (double axis, single axis) hydraulic clamping card shaft (double axis, single axis), shaft.With the development of society, now the network has begun to globalize, and now with the development of e-commerce, now the network application is also beginning to continue to grow.Because of its characteristics of modern marketing market, network Marketing has begun to become a new marketing route for some small and medium-sized enterprises.Veneer peeling machine is now in the network marketing is still relatively small, because the machinery is relatively important, and the network sales of products, can only be carried out by watching, can not try, touch the product.Therefore, there are many enterprises think that network marketing in veneer peeling machine machinery industry is difficult to develop.In fact, veneer peeling machine implementation of network marketing This also belongs to a new marketing road.. Veneer peeling machine is one of the equipment for the production of plywood, it belongs to the shaft mechanical transmission veneer peeling machine, suitable for the card shaft veneer peeling machine rotary cutting remaining wood core continue to spin into a single board, It can also be used to spin the trail material (300mm in diameter) into a single board.Veneer peeling machine is mainly composed of rack, double roller system, single roller system, tool holder, transmission system, electrical system and so on..In addition to checking the veneer peeling machine knife, but also pay attention to the temperature of each bearing, transmission sound, machine stability, the handle and button and limit switch effective sensitivity, especially the limit switch placement must be correct, as well as the combination of the various components, etc., should be systematically checked and adjusted , and the gearbox bearings and sliding surfaces are injected with enough lubricating oil, all reach normal, before the cutting test and use can be carried out..4. The height of the blade mouth is 0-1 mm higher than the center of the wood.If the vibration occurs during the rotary cut, it is due to the low installation of the knife, adjust the blade until the knife is not shaken.If the resistance of the rotary cut is too large or the case of broken skin, is due to the blade installation is too high, properly reduced to the appropriate can be..Preferred, veneer peeling machine industry users can use the network to promote the visibility of the product, then it is necessary to create a good website, their products to be placed on top, so that it can be more convenient, fast, reduce costs.The second is the product marketing strategy, because the current internet has a very good interactivity and guidance.Therefore, enterprises can according to the needs of users dynamic production and sales, at the same time can promote products to shape the brand of enterprises, the establishment of a good service framework.The price of the final product, the enterprise can be based on the product to establish their own pricing objectives, and finally according to the changing cost of the market supply and demand situation and the price of competitors to adjust in due course.In a card veneer peeling machine, the knife position is an important part of veneer peeling machine, and the knife position is also a part that needs to be noted when using veneer peeling machine, In our use of the time to check it regularly, the knife position is the key to veneer peeling machine, the knife bit high appearance of wood thin uneven, knife position low appearance flutter knife, must be carefully adjusted, not sloppy.The specific adjustment measures are as follows:.In the same way to measure the two ends and the middle of the knife, so that the knife and roll to maintain the level, about the card veneer peeling machine knife position measurement mainly pay attention to the above aspects of the attention, I hope the above information can be helpful to the vast number of users.:Use the triangle ruler (500x250 mm) to live on the upper and inner parts of the double flower roll, then use the ruler (150) to resist the blade upward measurement, read the triangle ruler below the intersection of the ruler scale value, rotary wood skin thickness between 1.2-1.9 when the reading is 102mm; thickness between 0.6 mm1.2 mm, Knife height in 101-102 mm; thickness between 1.9 mm2.6 mm, the knife is high in 102-102.5 mm.Thickness is larger than 2.6mm when the knife is high in 102.5-103mm.Comments: 0
Add a New Comment
page revision: 0, last edited: 02 Dec 2018 05:39